Feit Electric’s smart lighting solutions have revolutionized the way we control and interact with our indoor lighting. With the ability to adjust brightness, color, and ambiance with just a few taps on our smartphones, it’s hard to imagine going back to traditional lighting systems. However, like any smart device, Feit Electric’s WiFi-enabled bulbs can sometimes lose their connection to your network, leaving you in the dark – literally.
Don’t worry; reconnecting your Feit Electric bulbs to WiFi is a relatively straightforward process. In this comprehensive guide, we’ll walk you through the steps to get your smart lighting system up and running again.
Before You Begin: Troubleshooting 101
Before we dive into the reconnecting process, let’s do some basic troubleshooting to ensure that the issue lies with the bulb’s WiFi connection and not with your network or router.
Check Your Router and Network
Make sure your router is turned on and functioning properly. Restart it if necessary. Also, check that your network is stable and not experiencing any outages. You can do this by checking your internet connection on another device, such as a laptop or smartphone.
Verify the Bulb’s Power Source
Ensure that the Feit Electric bulb is properly screwed into its socket and receiving power. If the bulb is not turning on, try replacing it with a traditional incandescent bulb to rule out any issues with the socket.
Restart the Feit Electric App
Close and reopen the Feit Electric app on your smartphone or tablet. This often resolves connectivity issues between the app and the bulb.
If none of these troubleshooting steps resolve the issue, it’s likely that the problem lies with the bulb’s WiFi connection.
Reconnecting Feit Electric to WiFi: A Step-by-Step Guide
Now that we’ve ruled out any network or power issues, let’s move on to reconnecting your Feit Electric bulb to WiFi.
Step 1: Open the Feit Electric App
Launch the Feit Electric app on your smartphone or tablet. If you’ve already tried restarting the app, you can skip this step.
Step 2: Access the Bulb’s Settings
Tap on the “Devices” tab at the bottom of the app’s main screen. Find the bulb that’s not connecting to WiFi and tap on it. This will take you to the bulb’s settings page.
Step 3: Forget the Bulb
Tap the “Forget Device” button at the top-right corner of the settings page. This will remove the bulb from your app and allow you to reconnect it to WiFi.
Step 4: Put the Bulb in Setup Mode
Turn off the power to the bulb for 5 seconds and then turn it back on. Repeat this process 2-3 times to put the bulb in setup mode. You’ll know the bulb is in setup mode when it starts flashing rapidly.
Step 5: Connect to the Bulb’s WiFi Network
Go to your smartphone’s WiFi settings and look for the Feit Electric bulb’s WiFi network (it should be labeled “Feit Electric-XXXX”). Connect to this network.
Step 6: Return to the Feit Electric App
Go back to the Feit Electric app and tap on the “Add Device” button. The app should automatically detect the bulb in setup mode.
Step 7: Choose Your WiFi Network
Select your home WiFi network from the list of available networks. Enter your network’s password if prompted.
Step 8: Wait for the Bulb to Connect
The Feit Electric app will now connect the bulb to your WiFi network. This may take a few minutes, so be patient.
Step 9: Verify the Connection
Once the bulb has connected to your WiFi network, you should see a “Connected” status in the Feit Electric app. You can now control the bulb remotely using the app.
Common Issues and Solutions
While reconnecting your Feit Electric bulb to WiFi is a relatively straightforward process, you may encounter some issues along the way. Here are some common problems and their solutions:
Issue: The Bulb Won’t Connect to WiFi
Solution: Ensure that you’re using the correct WiFi network and password. Also, check that your router is not blocking the bulb’s connection. Try restarting your router or moving the bulb closer to the router.
Issue: The Feit Electric App Won’t Detect the Bulb
Solution: Make sure the bulb is in setup mode (flashing rapidly) and that you’re connected to its WiFi network. Restart the app and try again.
Best Practices for Maintaining a Strong WiFi Connection
To minimize the risk of your Feit Electric bulb losing its WiFi connection, follow these best practices:
Use a Strong WiFi Network
Ensure that your WiFi network has a strong signal and is not prone to outages. You can use a WiFi analyzer app to check for interference from neighboring networks.
Keep Your Router Up-to-Date
Regularly update your router’s firmware to ensure you have the latest features and security patches.
Position Your Bulb and Router Optimally
Place your router in a central location to ensure a strong signal throughout your home. Position your Feit Electric bulb in a location that receives a strong WiFi signal.
Limit Interference from Other Devices
Keep other devices that operate on the same frequency band (e.g., cordless phones, microwaves) away from your router and Feit Electric bulb to minimize interference.
By following these steps and best practices, you should be able to maintain a strong and stable WiFi connection between your Feit Electric bulb and your router. Happy smart lighting!
What is Feit Electric and how does it work?
Feit Electric is a brand of smart home devices that allow you to control and monitor your lighting and other electrical systems remotely using your smartphone or tablet. Feit Electric devices connect to your home’s WiFi network, allowing you to control them from anywhere in the world.
To use Feit Electric devices, you’ll need to download and install the Feit Electric app on your smartphone or tablet. Once you’ve set up your device and connected it to your WiFi network, you can use the app to control your lights, adjust their brightness and color, and even set schedules and routines for when you’re not home.
Why is my Feit Electric device not connecting to WiFi?
There are several reasons why your Feit Electric device may not be connecting to WiFi. Some common issues include incorrect WiFi password, out-of-range WiFi signal, or interference from other devices on your network. Additionally, if you’ve recently changed your WiFi network or password, you may need to reconnect your Feit Electric device.
To troubleshoot the issue, try restarting your router and Feit Electric device, then try connecting again. Make sure you’re entering the correct WiFi password and that your device is within range of your router. If the problem persists, try resetting your Feit Electric device to its factory settings and setting it up again.
How do I reset my Feit Electric device to its factory settings?
To reset your Feit Electric device to its factory settings, press and hold the reset button on the device for 10-15 seconds until the LED light starts flashing. Release the button and wait for the device to restart. This will restore the device to its original settings, erasing any customized settings or schedules you may have set up.
After resetting your device, you’ll need to set it up again using the Feit Electric app. Make sure to follow the in-app instructions carefully to ensure that your device is properly connected to your WiFi network.
What if I’ve forgotten my Feit Electric app login credentials?
If you’ve forgotten your Feit Electric app login credentials, don’t worry! You can easily reset your password using the “Forgot Password” feature in the app. Tap on the “Forgot Password” button on the login screen, enter your email address, and follow the instructions to reset your password.
Once you’ve reset your password, you’ll be able to log back into the app and access your Feit Electric devices. Make sure to choose a strong and unique password to keep your account secure.
Can I connect multiple Feit Electric devices to my WiFi network?
Yes, you can connect multiple Feit Electric devices to your WiFi network. In fact, one of the benefits of Feit Electric devices is that they can be controlled and monitored remotely using a single app. You can add multiple devices to your account and control them individually or in groups.
To add a new device, simply open the Feit Electric app, tap on the “+” icon, and follow the in-app instructions to add the new device to your account. Make sure to name each device uniquely so you can easily identify them in the app.
What if I’ve recently changed my WiFi network or password?
If you’ve recently changed your WiFi network or password, you’ll need to reconnect your Feit Electric devices to the new network. To do this, open the Feit Electric app, go to the device settings, and select “WiFi Settings.” Enter the new WiFi network name and password, and save the changes.
Make sure to reconnect each of your Feit Electric devices individually to ensure they’re all connected to the correct network. If you’re having trouble reconnecting, try restarting your router and devices, then try again.
Is my Feit Electric device compatible with Amazon Alexa or Google Assistant?
Yes, many Feit Electric devices are compatible with Amazon Alexa and Google Assistant, allowing you to control your devices using voice commands. To set up voice control, you’ll need to link your Feit Electric account to your Alexa or Google Assistant account, then enable the Feit Electric skill.
Once you’ve set up voice control, you can use voice commands to turn your lights on and off, adjust their brightness, or even set scenes and routines. Check the Feit Electric website or app for more information on voice control compatibility and setup instructions.